Electron. flow monitor G 1/2", 230 V AC

SWE 12/230 ES-4A

Exemplary representation: Electronic flow monitor
813,65€ incl. VAT
pcs
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.beschreibung_headline') }}
Application:
The electronic flow monitor monitors liquid media continuously. Its application can be seen wherever flows need to be monitored with minimal pressure loss. The single-piece version of the measuring pin reduces the sensitivity to contamination to a considerable extent. The electronic flow monitor works as per the calorimetric principle. The front face of the sensor is heated up to a few degrees over the temperature of the flow media. When the medium flows, the heat generated in the sensor is dissipated, i.e. the sensor is cooled. The cooling process is a perfect measure of the speed of flow.
The sensor signal is compared with the reference data stored in the micro-controller. Differences between the desired and actual values of the speed of flow trigger off an output signal.


Materials:
measuring element: 1.4301, housing: glass fibre reinforced polyamide

Temperature range:
-20 to +60 °C (medium: -20 to +80 °C)

Media:
Water and aqueous media

Protection class:
IP 65

Electrical connection:
M 16x1.5 cable gland

Advantages compared with mechanical flow monitors:
•optimum temperature compensation,
•intelligent switch property,
•measuring range adaptation, no moving parts,
•simplest installation, commissioning and operation,
•low pressure loss


Optional:
Material of measuring element: 1.4404 -4A, Electrical connection through an M 12 plug (A-coded, 4-pole, 24 V DC) -M12

Switching range depending on the tube diameter (for water):
DN 8: 0,12 - 6,0 l/min, DN 10: 0,19 - 9,4 l/min, DN 15: 0,42 - 21,8 l/min; DN 20: 0,75 - 37,7 l/min, DN 25: 1,18 - 59 l/min, DN 30: 1,7 - 84,8 l/min, DN 40: 3 - 150 l/min, DN 50: 4,7 - 235 l/min, DN 60: 6,8 - 340 l/min, DN 80: 12 - 603 l/min, DN 100: 18,8 - 942 l/min, DN 150: 42,4 - 2120 l/min
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Version 1.4404
Thread G 1/2"
Voltage 230 V AC
Type of contact Relay max. 5 A,
approx. Switching range (Water) with nominal diameter of 8 mm [l/min] 0,12 - 6,0
approx. Switching range (Water) with nominal diameter of 10 mm [l/min] 0,19 - 9,4
approx. Switching range (Water) with nominal diameter of 15 mm [l/min] 0,42 - 21,8
approx. Switching range (Water) with nominal diameter of 20 mm [l/min] 0,75 - 37,7
approx. Switching range (Water) with nominal diameter of 25 mm [l/min] 1,18 - 59,0
approx. Switching range (Water) with nominal diameter of 30 mm [l/min] 1,7 - 84,8
approx. Switching range (Water) with nominal diameter of 40 mm [l/min] 3,0 - 150,0
approx. Switching range (Water) with nominal diameter of 50 mm [l/min] 4,7 - 235,0
approx. Switching range (Water) with nominal diameter of 60 mm [l/min] 6,8 - 340,0
approx. Switching range (Water) with nominal diameter of 80 mm [l/min] 12,0 - 603,0
approx. Switching range (Water) with nominal diameter of 100 mm [l/min] 18,8 - 942,0
approx. Switching range (Water) with nominal diameter of 150 mm [l/min] 42,4 - 2120,0
SWE12/230ES-4A
{{ $t('shop.all.gewicht') }} 700 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }} 90261029
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}

Accessories

{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.