Polyethylene tube 1/8" x 1,6 mm, natural

Properties:
The lightweight and low-priced polyethylene hoses are suitable for simple applications or applications with increased requirements for chemicals resilience. They are not bending-resistant and tend to deform permanently during processing.

Advantages:
•very good chemicals resilience,
•resistant to water, acids, and alkalis,
•low weight,
•natural colour: FDA approved raw material

Materials:
LD-PE (colour natural: FDA 21 CFR 177.1520 (c) and NSF 51)

Temperature range:
-10 to +60 °C

Shore hardness:
50 D

Roll length:
30 m

Note:
We recommend only cutting these hoses with a sharp tube cutter. Due to the risk of deformation when cutting and the absent rest force of the hose, not all plug connections are suitable for use with this hose. We recommend the use of screw connections with union nuts, PK push in fittings and, if necessary, our push in fitting series IQS Standard (IQS-Inch) and IQS-LE.

Reference values for the pressure utilisation under temperature loading:
to +20°C: 100%, +30°C: 83%, +40°C: 72%, +50°C: 64%, +60°C: 57%

Hose diameter (outer x inner) [mm]	1/8" x 1,6
Outer diameter [mm]	3,17
colour	natural
Operating pressure [bar]	21
Min. bend radius [mm]	12

{{ $t('shop.all.gewicht') }}	6,2 g / m
{{ $t('shop.display.artikel.verpackungseinheit') }}	30 m
{{ $t('shop.display.artikel.zollwarennummer') }}	39173900