{{ $t('shop.all.spaetbestellservice.hinweis') }}
Design | For T-slot |
Based on standard | EN 60947-5-2 |
Permission |
RCM mark, c UL us - Listed (OL) |
CE certificate (see declaration of conformity) | to EU EMC directive |
KC-mark | KC-EMV |
Special features |
Oil resistant, Welding field immune, resistant to welding spatter, UV-resistant |
Material information |
Copper and PTFE-free, RoHs compliant |
Measured parameter | Position |
Measurement principle | Magnetoresistive |
ambient temperature [°C] | -25 to 85 |
Max. movement speed [m/s] | 1 |
Repeatability [mm] | 0,2 |
Control output | NPN |
Switching behaviour during welding | Output signal freezes |
Switching element function | NO contact |
Switch on time [ms] | <= 15 ms |
Switch off time [ms] | <= 25 ms |
Max. switching frequency [Hz] | 25 |
Max. output current [mA] | 100 |
Max. output current in fastening sets [mA] | 100 |
Max. switching capacity DC [W] | 2,8 |
Max. switching capacity DC in fastening sets [W] | 2,8 |
Voltage drop [V] | < 1,5 V |
Minimum load current [mA] | 0 |
Residual current [mA] | < 0,14 mA |
Short circuit resistance | yes |
Overload resistant | Available |
Rated operating voltage DC [V] | 24,0 |
Operating voltage range DC [V] | 10 to 30 |
Reverse polarity protection | for all electrical connections |
Electrical connection 1, connection type | cable |
Electrical connection 1, connection technology | Open end |
Electrical connection 1, number of pins / wires | 3 |
Connection outlet direction | along |
Test conditions line |
Bending radius strength to Festo standard, Test conditions on request |
Cable length [MTR] | 5,0 |
Line properties | resistant to welding spatter |
Cable shield colour | Grey |
Cable sleeve material |
PVC, Irradiated crosslinking |
Insulation sleeve material | PVC |
Fastening type |
Insertable from above into the slot, Permanently screwed |
Max. tightening torque [Nm] | 0,6 |
installation position | arbitrary |
Product weight [g] | 119,4 |
Housing colour | black |
Housing material |
High-alloyed stainless steels, PA reinforced, Epoxy resin |
Switching status indicator | LED yellow |
Functional reserve display | LED orange |
Ambient temperature for moving cable placements [°C] | -5 to 80 |
Protection category |
IP65, IP68 |
Noise immunity to magnetic fields |
Insensitive to AC magnetic fields (50...60 Hz) < 200 mT, Insensitive to MFDC magnetic fields (1000 Hz) < 200 mT, Type limited insensitive to permanent magnetic fields < Bon |
Wire ends | Wire end sleeve |
{{ $t('shop.all.gewicht') }} | 119,4 g / pcs |
{{ $t('shop.display.artikel.zollwarennummer') }} | 85365019 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred, please reload this page and try again.