SDBT-BSW-1L-ZU-W-5-N-LE (2427617) proximity sensor

OT-FESTO058013

Exemplary representation: SDBT-BSW-1L-ZU-W-5-N-LE
55,81€ incl. VAT
pcs
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Design For T-slot
Based on standard EN 60947-5-2
Permission RCM mark,
c UL us - Listed (OL)
CE certificate (see declaration of conformity) to EU EMC directive
KC-mark KC-EMV
Special features Oil resistant,
Welding field immune,
resistant to welding spatter,
UV-resistant
Material information Copper and PTFE-free,
RoHs compliant
Measured parameter Position
Measurement principle Magnetoresistive
ambient temperature [°C] -25 to 85
Max. movement speed [m/s] 1
Repeatability [mm] 0,2
Control output Contactless 2-wire
Switching behaviour during welding Output signal freezes
Switching element function NO contact
Switch on time [ms] <= 15 ms
Switch off time [ms] <= 25 ms
Max. switching frequency [Hz] 25
Max. output current [mA] 80
Max. output current in fastening sets [mA] 80
Max. switching capacity DC [W] 1,9
Max. switching capacity DC in fastening sets [W] 1,9
Voltage drop [V] < 6 V
Minimum load current [mA] 2,4
Residual current [mA] < 0,7 mA
Short circuit resistance yes
Overload resistant Available
Rated operating voltage DC [V] 24,0
Operating voltage range DC [V] 10 to 30
Reverse polarity protection for all electrical connections
Electrical connection 1, connection type cable
Electrical connection 1, connection technology Open end
Electrical connection 1, number of pins / wires 2
Connection outlet direction along
Test conditions line Bending radius strength to Festo standard,
Test conditions on request
Cable length [MTR] 5,0
Line properties resistant to welding spatter
Cable shield colour Grey
Cable sleeve material PVC,
Irradiated crosslinking
Insulation sleeve material PVC
Fastening type Insertable from above into the slot,
Permanently screwed
Max. tightening torque [Nm] 0,6
installation position arbitrary
Product weight [g] 116,9
Housing colour black
Housing material High-alloyed stainless steels,
PA reinforced,
Epoxy resin
Switching status indicator LED yellow
Functional reserve display LED orange
Ambient temperature for moving cable placements [°C] -5 to 80
Protection category IP65,
IP68
Noise immunity to magnetic fields Insensitive to AC magnetic fields (50...60 Hz) < 160 mT,
Type limited insensitive to permanent magnetic fields < Bon
Wire ends Wire end sleeve
OT-FESTO058013
{{ $t('shop.all.gewicht') }} 116,9 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }} 85365019
{{ $t('shop.all.hersteller') }} Festo
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}

Accessories

{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.